CO-96 vs CO-204 denial

CO-96 vs CO-204 denial: what is the difference?

Both denials say a service is not covered, but they point to different problems. Here is how to tell them apart and what to do with each one.

Denial codesPlain wordsFree

The short answer

Both codes mean the payer will not pay because the service is not covered. The difference is how specific they are.

  • CO-96 is the general “non-covered charge” code. The real reason is in the remark code that comes with it.
  • CO-204 is specific. The service, equipment or drug is not covered under the patient’s current benefit plan.

So with 96, read the remark code first. With 204, check the patient’s plan benefits first.

Side by side

CO-96CO-204
Official wordingNon-covered charge(s). A remark code must come with itThis service, equipment or drug is not covered under the patient’s current benefit plan
How specificBroad. The remark code gives the real reasonSpecific. The plan’s own benefits leave this service out
Common causesService excluded, not covered for this diagnosis, provider type or place of service, or billed with the wrong codeThe plan does not include this benefit, or the patient is on a different plan or product than expected
Check firstThe remark code on the ERA or EOBEligibility and benefits for the date of service
Can a correction fix it?Sometimes, when the cause is a billing errorLess often. Mostly when the plan or benefit was mapped wrongly
Group codeCO or PRCO or PR

How to work a CO-96 denial

  1. Check the claim status on the payer portal or call the payer.
  2. Read the remark code on the ERA or EOB. It is the real reason.
  3. Check eligibility and benefits for the date of service. Is this service covered under the plan?
  4. If the cause is a billing error, like the wrong CPT, modifier, place of service or diagnosis, ask the coding team to fix it and send a corrected claim. Original Medicare Part B does not accept corrected claims, so check your MAC’s rules for a new claim or a clerical error reopening.
  5. If the plan really excludes the service, follow your client’s rules.
  6. If you think the payer is wrong, call, note the representative’s name and the call reference number, and ask for reprocessing. Appeal only with proof.

How to work a CO-204 denial

  1. Verify eligibility and benefits for the date of service. Find out which plan or product the patient really has.
  2. Ask the payer if this service is excluded from the plan. Note the representative’s name and the reference number.
  3. Make sure the claim went to the right plan. The patient may have another insurance that covers it. See the CO-109 page.
  4. Sometimes the payer processes the service under the wrong benefit. If so, ask them to reprocess it.
  5. If it is truly excluded, look at the group code and follow your client’s rules.

Can you bill the patient?

Look at the group code, not only the number.

  • CO: contractual obligation. Write it off. It cannot be billed to the patient.
  • PR: the patient may owe it. Check your client’s rules first. For out-of-network providers, adjustments can come as PR, but they should not be billed to the patient without review.

Common mistakes

  • Sending the same claim again without any change. It will deny as a duplicate (CO-18).
  • Ignoring the remark code on a CO-96.
  • Appealing without any proof that the service is covered.
  • Forgetting the filing deadline. Calculate it from the processed date.

Questions people ask

Is CO-204 the same as CO-96?

No. Both mean not covered, but CO-96 is general and needs a remark code to explain it. CO-204 says the patient’s own plan does not include the service.

Is CO-204 a rejection?

No. A rejection stops a claim before it is processed. CO-204 comes on the ERA or EOB after the payer has processed the claim, so it is a denial.

Should I appeal a CO-204?

Only if you have a reason to believe the service is covered, for example the payer used the wrong plan or benefit. Send proof of the patient’s benefits and the call reference number, and check the appeal deadline first.

What if the patient has two insurances?

Check the other insurance. The service may be covered there. Update the coordination of benefits and bill it correctly.

Updated November 2026. For education only. Payer rules differ, so confirm important details with the payer or your client.

Denial code pages mentioned here

Each code opens its own page on MBillers with the reason and the corrective action.

  • CO-96 – Noncovered services (Unspecified).
  • CO-109 – Services not covered by this payer, you must send them to correct payer/insurance.
  • CO-18 – Exact duplicate service/claim.

Keep learning

Related comparisons and pages from MBillers.

Would you like to help our billing family?

Help us keep MBillers accurate and up to date by reporting incorrect information, sharing valuable medical billing knowledge, or suggesting new content you’d like to see. Every submission is carefully reviewed, and approved contributions are added to support and strengthen the entire billing community.

Is your team still writing every claim note by hand?

The Claim Note Tool builds each claim status note in seconds, in one standard format for your whole organization. Try it free for 1 week.