8-Minute Rule

8-Minute Rule Calculator

Turn treatment minutes into billable units for timed therapy codes. Use the Medicare (CMS) 8-minute rule or the AMA midpoint rule, and see every step of the math. Everything runs in your browser.

Medicare ruleAMA midpoint ruleNothing uploaded

Calculate your units

Add each service with its direct, one-on-one minutes for one patient on one date of service. Only codes and minutes are needed, so do not type patient names or IDs. Nothing you enter is sent or saved.

Medicare uses the CMS rule. Many commercial payers and some Medicaid programs use the AMA midpoint rule instead. Confirm with the payer.

Type the code and the Timed or Untimed choice fills in for common therapy codes. You can change it. Rows with the same code are added together. See which codes are timed.

Which codes are timed?

Timed codes are billed in 15-minute units. Untimed codes are billed once per session, usually 1 unit. Check the CPT descriptor in your code book: if it says “each 15 minutes”, the code is timed.

Common timed codes

97032, 97033, 97034, 97035, 97036, 97110, 97112, 97113, 97116, 97124, 97140, 97530, 97532, 97533, 97535, 97537, 97542, 97750, 97755, 97760, 97761, 97763

Common untimed codes

97010, 97012, 97014, 97016, 97018, 97022, 97024, 97026, 97028, 97150, 97161 to 97168 (evaluations and re-evaluations), G0283, 92507

These lists are common examples, not every code. Some payers also bundle or do not pay certain codes, so check the payer policy.

Minutes to units (Medicare)

Add up the minutes of all timed codes for the day, then find the total here. Under 8 minutes in total means no timed unit can be billed.

UnitsTotal timed minutes
18 to 22 minutes
223 to 37 minutes
338 to 52 minutes
453 to 67 minutes
568 to 82 minutes
683 to 97 minutes
798 to 112 minutes
8113 to 127 minutes

The pattern continues: every extra 15 minutes adds one more unit, so 128 to 142 minutes is 9 units.

How the Medicare rule works

1Add the timed minutes

  • Count only direct, one-on-one time with the patient.
  • Leave out untimed services, documentation, setup and waiting.

2Find the total units

  • Use the chart above to turn the total minutes into units.

3Give full units first

  • Each code gets one unit for every full 15 minutes.

4Give the leftover units

  • Any units still unassigned go to the codes with the most minutes left over.
  • If codes tie, the extra unit may go to any one of them.

Example: 33 minutes of 97110 and 7 minutes of 97140 is 40 timed minutes, which is 3 units. 97110 has 2 full units (30 minutes) with 3 minutes left over. 97140 has 7 minutes left over, which is the most, so it gets the third unit. Bill 97110 x2 and 97140 x1.

Medicare rule vs AMA midpoint rule

Medicare (CMS)

All timed minutes are added together first. The total sets the number of units, and then the units are shared between the codes.

AMA midpoint

Each code is counted by itself. A code gets a unit for each full 15 minutes, plus one more if 8 or more minutes are left over.

Same visit, different result: 10 minutes of 97110 and 10 minutes of 97530. Medicare adds them to 20 minutes, which is 1 unit. The AMA midpoint rule gives each code 1 unit, which is 2 units. Always use the rule your payer follows.

Official sources

The rule is in the Medicare Claims Processing Manual. Always confirm with the current CMS manual and your payer.

  • Claims Processing Manual, Chapter 5, Section 20.2 (units and timed codes)
  • Benefit Policy Manual, Chapter 15, Section 220.3 (documentation)

Common mistakes

Counting each code separately. Under the Medicare rule the total time sets the units, not each code on its own.

Counting untimed time. Evaluations, hot or cold packs, unattended electrical stimulation and group therapy are not part of the timed total.

Rounding every code up. A code with 7 minutes left over does not get a unit unless units are still left to assign.

Billing a unit for under 8 minutes. If the total timed minutes are under 8, no timed unit can be billed.

Using one rule for every payer. Medicare uses the CMS rule. Some payers use the AMA midpoint rule. Check the payer policy.

Weak notes. Medicare expects the total timed code minutes and the total treatment time in the note.

This calculator is for education and quick checks. It does not include therapy assistant modifiers, payment reductions or payer-specific rules. Always confirm with the official CMS manual and the payer.

Would you like to help our billing family?

Help us keep MBillers accurate and up to date by reporting incorrect information, sharing valuable medical billing knowledge, or suggesting new content you’d like to see. Every submission is carefully reviewed, and approved contributions are added to support and strengthen the entire billing community.

Is your team still writing every claim note by hand?

The Claim Note Tool builds each claim status note in seconds, in one standard format for your whole organization. Try it free for 1 week.